Aim Tech Welding
System Sdn Bhd
7865, Jalan Teluk Batu 1,
Batu 4 1/2, Jalan
Kebun Seksyen 36,
40470 Shah Alam,
Selangor, Malaysia.
+603-5161 7213
+603-5161 7593
kevinquay@gmail.com
info@aimtechwelding.com.my
+60123702467
AIM CUT-160 PLASMA CUTTING MACHINE
| Previous | 6 / 6 | Next |
| ITEM | UNIT | MODEL |
| LGK-160 | ||
| Power | V/Hz | 3~380±15% 50/60 |
| Input Power | KVA | 32.2 |
| Input Rated Current | A | 49 |
| Output Current | A | 160 |
| Output Voltage | V | 144 |
| OCV | V | 315 |
| Duty Cycle | - | 100% (40 ¡æ) |
| Efficiency | - | 88% |
| Power Factor | - | 0.92 |
| Output Current Range | A | 40-160 |
| ARC-HF | - | HF |
| FOR WATER | - | WATER COOLED |
| For double Cutting | - | WATER COOLED |
| Quality Cutting (carbon steel) | MM | 40 |
| Perforation Capacity (carbon steel) | MM | 22 |
| MAX CUTTING CAPACITOR | MM | 60 |
| COOLED | - | ·çÀä |
| TORCH | - | AS(<100A)WATER COOLED(>100A |
| Insulation grade | - | F |
| Protection level | - | IP21S |
| Size | MM | 650x390x810 |
| Weight | KG | 70 |
Product Speciality
1. Able to cut metal plates in various routes;
2.Outstanding cutting performance. Especially suitable for cutting carbon steel,
stainless steel,aluminium and copper;
3. Widely used in iron structure construction, manufacture and automobile maintenance;
4. Improved cooling method for the cutting torch; greatly makes the cutting consumables more endurable;
5.Using air pressure adjusting equipment.Able to operate when the external air pressure is too high;
6.The cutting current is continuously adjustable.Direct and precise;
7. With protectionof electro circuit against over current,over voltage and low-voltage. Safety in opreation is assured
